EPA AIM Act enforcement is live. Violations: up to $60,000/violation/day. Are you compliant? →
HVAC OPTIMIZATION
Enhance occupant comfort, reduce stressful emergencies, and save money automatically
Axiom's HVAC Optimization engine continuously identifies faulty units and maintains the health of the RTU fleet. while learning site-specific baselines and adjusting setpoints and operating parameters through the existing controller to deliver energy savings automatically, without affecting occupant comfort.
11%
Of HVAC energy use
Energy Savings
4-9x
Return on Investment
At each facility
100%
Expert-reviewed, zero effort from your team
Autonomous
$0
Fully-remote installation
New Hardware
MODULE
HVAC OPTIMIZATION
Enhance occupant comfort, reduce stressful emergencies, and save money - automatically
Axiom's HVAC Optimization engine continuously identifies faulty units and maintains the health of the RTU fleet, while learning site-specific baselines and adjusting setpoints and operating parameters through the existing controller to deliver energy savings - automatically, without affecting occupant comfort.
11%
Energy Savings
Of HVAC Energy Use
4-9x
Return on Investment
At each facility
100%
Autonomous
Expert-reviewed, zero effort from your team
$0
New Hardware
Fully-remote installation
THE PROBLEM
The waste hiding in commercial HVAC is invisible, until it shows up on the bill.
HVAC is one of the largest energy uses in any commercial building, and rooftop units are a major source of avoidable waste. In retail grocery and convenience operations, those costs compound quickly across a fleet, and much of the waste is entirely preventable.
"The waste hiding in commercial HVAC systems isn't a technical problem. It's an operational problem. Nobody is watching, so unit failures and energy waste can silently persist for months or years without anyone noticing."
Amrit Robbins, CEO & Co-Founder, Axiom Cloud
A rooftop unit runs at full capacity through the night, conditioning an empty building as if it were packed with customers. Two adjacent units quietly battle each other, one heating while the other cools, burning double the energy without changing the temperature at all. These failures don't trip an alarm, so they hide in plain sight, draining utility budgets across every location in the fleet.
Conditioning empty buildings
RTUs commonly run at full capacity during off-hours, heating and cooling an empty building as if it were full of customers.
Units battling each other
Adjacent units run in opposite modes, one heating and one cooling, consuming nearly double the energy with no change in temperature.
Failures that never alarm
Configuration faults persist for months or years without triggering an alarm, silently driving up utility costs fleet-wide.
Conditioning empty buildings
RTUs commonly run at full capacity during off-hours, heating and cooling an empty building as if it were full of customers.
Units battling each other
Adjacent units run in opposite modes, one heating and one cooling, consuming nearly double the energy with no change in temperature.
Units battling each other
Adjacent units run in opposite modes, one heating and one cooling, consuming nearly double the energy with no change in temperature.
Units battling each other
Adjacent units run in opposite modes, one heating and one cooling, consuming nearly double the energy with no change in temperature.
Failures that never alarm
Configuration faults persist for months or years without triggering an alarm, silently driving up utility costs fleet-wide.
Top 5
U.S. RETAIL GROCER
"HVAC energy opportunities are vast. We've never spent much time commissioning HVAC. When we get it running, we make it cold, we make it hot. But optimizing that system and how they work together, I think there's a ton of opportunity."
— Director of Facility Engineering at a top-5 U.S. retail grocer
THE SOLUTION
Lower energy costs and better comfort, automatically.
The same platform already optimizing refrigeration across the enterprise now covers HVAC. Axiom identifies inefficiencies across your full portfolio, quantifies what they're costing you, and resolves what it can remotely, with no new hardware, no truck rolls, and no operational burden.
The approach: Axiom continuously identifies faulty units and maintains the health of the RTU fleet, while learning site-specific baselines and adjusting setpoints and operating parameters through the existing controller to deliver energy savings automatically, without affecting occupant comfort.
Lower energy spend
Continuous tuning captures savings static schedules can't reach.
Comfort, protected
Every change is checked against comfort standards first.
No operational lift
Software-only and expert-run, so your team stays on the store
THE PLATFORM
See it work across every rooftop unit, in one platform.
Axiom connects securely to the building management systems and controllers already in place, giving you clear visibility into every unit, diagnosing what's wrong, and resolving what it can remotely.
VISIBILITY
DIAGNOSIS
RESOLUTION
See every RTU in real time
Issues found and priced
Space temperature, setpoints, humidity, and more, surfaced per site, per unit.
Inefficiencies across the fleet, each with a dollar impact and whether it can be resolved remotely.
Approve, and it's done
Review the proposed change and savings, approve, and Axiom applies the fix remotely, with no truck roll.
Safe by design. Every optimization is comfort-checked and expert-reviewed before it goes live, and you can adjust or roll back any change at any time.
RTU SAVINGS
~11% energy savings on RTU consumption
Based on analysis of operational data from a Fortune-50 grocery retailer, Axiom's optimization engine identifies significant energy waste across HVAC fleets that can be eliminated without affecting store comfort or operations.
-
Savings quantified per store with full transparency into methodolgy
-
Occupant comfort is never sacrificed. Every optimization is checked against comfort thresholds before it's applied
-
The module pays for itself many times over on energy spend alone
HVAC OPTIMIZATION
Fully autonomous, validated by our experts
Axiom identifies operational inefficiencies and implements optimizations directly through your controller without requiring any action from your facilities or energy teams.
-
Every optimization is reviewed by Axiom's HVAC experts before implementation
-
Your team remains full visibility and control with the ability to review, adjust or rollback any change at any time
-
Complete audit trail of every optimization applied across your fleet
Fully remote, software-only deployment
DEPLOYMENT
Axiom connects securely to existing refrigeration, HVAC, or building management system controllers, with no on-site installers required. Deployment scales across your entire store portfolio from a single platform.
-
Goes live in days, not months
-
No truck rolls, no on-site visits, no capital expenditure
-
Scales across hundreds of stores without additional overhead
-
Applicable to any commercial building with rooftop units: grocery, retail, office, warehouse, and more
RTU SAVINGS
~11% energy savings on RTU consumption
Based on analysis of operational data from a Fortune 500 U.S. grocery retailer, Axiom's optimization engine identifies significant energy waste across HVAC fleets that can be eliminated without affecting store comfort or operations.
-
Savings quantified per-store with full transparency into methodology
-
Occupant comfort is never sacrificed - every optimization is checked against comfort thresholds before it's applied
-
The module pays for itself many times over on energy spend alone
9x
Return on Investment
Energy savings far exceed the cost of the module
AI + Experts
Every Optimization Reviewed
Your team stays informed with zero operational burden
HVAC OPTIMIZATION
Fully autonomous - validated by our experts
Axiom identifies operational inefficiencies and implements optimizations directly through your controller without requiring any action from your facilities or energy teams.
-
Every optimization is reviewed by Axiom's HVAC experts before implementation
-
Your team retains full visibility and control with the ability to review, adjust, or rollback any change at any time
-
Complete audit trail of every optimization applied across your fleet
DEPLOYMENT
Fully remote, software-only deployment
Axiom connects securely to existing refrigeration, HVAC, or building management system controllers - no on-site installations required. Deployment scales across your entire store portfolio from a single platform.
-
No truck rolls, no on-site visits, no capital expenditure
-
Goes live in days, not months
-
Scales across hundreds of stores without additional overhead
-
Applicable to any commercial building with rooftop units - grocery, retail, office, warehouse and more
Zero
On-Site Hardware Required
Deploys entirely through your existing infrastructure
CAPABILITIES
Portfolio-wide HVAC optimization with comfort-first control
Axiom continuously detects HVAC issues, validates every change against comfort and corporate standards, and sustains savings across your fleet over time.
DOWNLOAD CASE STUDIES
THE FULL PLATFORM
Works Alongside Every Axiom Module
HVAC Optimization can work withother modules. Add our refrigeration Early Leak Detection, Predictive Maintenance, or Energy Efficiency to extend what you can catch and act on across your portfolio.
REQUIRED MODULE
Enterprise Visibility
One dashboard for all sites — unlimited historical data, predictive anomalies prioritized to drive results, an AI Insights agent, all integrated with your CMMS.
MODULE
Early Leak Detection
Catch refrigerant leaks days or weeks before they trigger an EPA report — across every site in your portfolio, with exact location and leak rate estimates.
REQUIRED
Predictive Maintenance
Surface compressor degradation, condenser fouling, and mechanical failures before they cause downtime — with AI-generated work order descriptions and fix instructions.
GET STARTED
See Your Portfolio in Axiom
HVAC Optimization works with your existing controllers. Tell us about your operation and we'll show you exactly what it looks like for your sites.
✓
No hardware required — connects to existing systems
✓
Live portfolio dashboard in 2 weeks or less
✓
CMMS integration (ServiceChannel, eMaint, Maximo, and others) available
✓
Flexible enterprise pricing — by site, by module, or portfolio-wide