Alerts Don't Fix Leaks: How Food City Cut Refrigerant-Leak Resolution Time by 58%

Key Takeaways
Detection was never the bottleneck. The handoff was. Food City cut its average refrigerant-leak time to resolution by 58% after Axiom Cloud's Early Leak Detection was wired straight into ServiceChannel, the computerized maintenance management system (CMMS) K-VA-T Food Stores dispatches from. The gain held at a seven-month recompute.
0 manual steps are required to generate a leak repair work order in ServiceChannel. Food City routes 100% of Axiom Cloud's predictive anomalies into it, pre-filled.
130+ stores run the end-to-end automated leak repair workflow. Every deployment was software-only, and the full store portfolio was live within about two weeks.
Axiom Cloud estimates $643K in cost savings identified over the past 12 months from Early Leak Detection alone across refrigerant, parts, and labor — modeled savings, 71% realized to date.
Under the American Innovation and Manufacturing Act (AIM Act), the U.S. Environmental Protection Agency (EPA) requires automatic leak detection (ALD) on refrigeration appliances holding 1,500 pounds or more, with existing equipment covered from January 1, 2027.
Why don't refrigerant leak alerts get leaks fixed?
A refrigerant leak alert is not a repair. At most grocery operators the alert waits in an inbox until someone opens the CMMS, types a work order, picks a trade and a provider, sets a priority, and dispatches it. Resolution speed is governed by that handoff, not by detection accuracy.
Refrigeration is the largest single category of maintenance costs for grocery retailers, up to 90% of service calls, and Food City's facility management team was routinely overwhelmed by the daily volume of alarms and emergencies. Before the integration, its early leak detection anomalies arrived by email and were entered into ServiceChannel manually before dispatch.
"Just because we get alerts doesn't mean that we get work orders."Lee Hamlin · Refrigeration Supervisor, Food City
Plenty of vendors sell the alert. The alert is the easy half.
What does an alert-only leak workflow cost an operator?
An alert-only workflow costs an operator in three places at once: the refrigerant that keeps escaping while the alert waits, the premium paid when a slow leak turns into an emergency call, and the compliance clock, which starts when refrigerant is added to an appliance and does not pause because nobody opened the email.
Refrigerant costs have risen sharply, and the EPA's AIM Act keeps phasing down the refrigerants supermarkets rely on. Every leak is getting more expensive to ignore — and every leak repair is now also a dated document. In an alert-only workflow, a person types those dates after the fact, out of memory and email. In an automated one, the work order is the record.

An alert-only workflow needs a person in the middle. An automated one does not.
What is indirect automatic leak detection, and what is a CMMS?
Automatic leak detection (ALD) means technologies that continuously monitor refrigerant-containing appliances and alert the operator when a leak is detected. Direct ALD uses fixed sensors that measure refrigerant concentration in air, detecting at 10 parts per million and alerting at 100. Indirect ALD is software: it compares operating conditions the appliance already reports — temperature, pressure, liquid levels, flow rate — against historical trends, and covers the whole appliance including outdoor components. Both types are acceptable under the AIM Act, and the choice is the operator's.
A computerized maintenance management system (CMMS) is the system of record a facilities team uses to create, assign, dispatch and close maintenance work orders. Food City's is ServiceChannel. Detection holds the diagnosis and the CMMS holds the labor, so until the two are connected, a person is the integration.
What changed when every predictive anomaly became a work order?
Food City connected Axiom Cloud's predictive leak detection directly to ServiceChannel in mid-December 2025. The workflow now produces a pre-filled leak repair work order with 0 manual steps in between, across 130+ stores, with no new hardware at any of them.
Food City piloted Axiom Cloud's Enterprise Visibility and Early Leak Detection modules across nine stores in 2024, then fleet-wide in 2025 — every deployment software-only, the full store portfolio live within about two weeks. Enterprise Visibility put the fleet's full refrigeration history in a fast, modern mobile interface.
"I think it was very convenient to be able to go up and select a different start date and look at it over a long period of time. So that makes it extremely convenient to use rather than dialing into the controller and doing the same thing." Tim Horton · Director of Refrigeration & HVAC, K-VA-T Food Stores
By late 2025 Food City trusted the alerts enough to automate work order generation, and the two teams integrated Axiom Cloud's platform with ServiceChannel, the CMMS Food City had recently adopted. Each work order arrives pre-filled to Food City's specifications — trade, provider, and priority mapped to its dispatch rules — with the full anomaly report, root cause, suggested actions, and estimated financial impact attached. ServiceChannel syncs work-order status back to Axiom Cloud, so both teams track every leak against the same record.
Worth saying plainly: detection and dispatch are one motion now.

An Axiom-created work order in ServiceChannel, completed with sensor analysis attached.
How much faster does Food City resolve refrigerant leaks now?
Average refrigerant-leak time to resolution at Food City fell 58% after the December 2025 go-live, and the gain held at a seven-month recompute. Axiom Cloud estimates $643K in savings from Early Leak Detection identified over the past 12 months across refrigerant, parts, and labor — modeled savings, 71% realized to date.

Average refrigerant-leak resolution time, before vs. after the ServiceChannel CMMS integration (go-live December 2025).
Every leak tracked to closure. Each anomaly carries a work-order number, live status, and resolve date, and Axiom Cloud reviews technician repair notes and work order statuses from ServiceChannel to confirm each fix.
Scale without strain. Food City team effort stayed flat as the fleet grew from nine pilot stores to more than 130, and addressing leaks early has helped the team avoid many reactive emergency leak situations.
Axiom Cloud customers resolve 70% of predictive anomalies within 45 days fleet-wide. For a refrigeration director, the proof is the closed work order.
"I like it when it says the leak was repaired and no gas was used." Tim Horton · Director of Refrigeration & HVAC, K-VA-T Food Stores

What changes for a refrigeration supervisor day to day?
The leak stops arriving as an email that has to be turned into a dispatch. It arrives as a work order already assigned to a provider with the anomaly report attached, early enough that the repair happens before refrigerant has to be added back to the rack.
"Now those leaks were found, and he didn't add any refrigerant to the rack."Lee Hamlin · Refrigeration Supervisor, Food City
"…we're able to get into the stores and actually get the leaks fixed before we actually get to the point we have to add refrigerant."A K-VA-T refrigeration supervisor
Read that as an operations metric. A leak repaired without adding refrigerant was caught before the charge was lost: no refrigerant purchase, no emergency call, no rack topped off instead of fixed. It is break/fix ending in one work order.
What does the AIM Act require for automatic leak detection, and when?
The EPA's Emissions Reduction and Reclamation rule under the AIM Act requires an ALD system on commercial refrigeration and industrial process refrigeration appliances with a full charge of 1,500 pounds or more that use a hydrofluorocarbon or a covered substitute. Appliances installed on or after January 1, 2026 need ALD at installation or within 30 days. Appliances installed on or after January 1, 2017 and before January 1, 2026 have until January 1, 2027. Appliances installed before 2017 fall outside the requirement.
📊 The AIM Act's leak-repair requirements have applied since January 1, 2026 to appliances holding 15 pounds or more, and any such appliance that leaks 125% or more of its full charge in a calendar year must be reported to the EPA by March 1 of the following year. (U.S. Environmental Protection Agency, Leak Repair Requirements for Appliances Containing Hydrofluorocarbons and Certain Substitutes, January 2026)

AIM Act refrigerant management deadlines. Source: U.S. EPA, January 2026.
Leak repair is the separate, broader obligation. For commercial refrigeration the applicable leak rate is 20%; above it, leaks must be repaired within 30 days of refrigerant being added, with an initial and a follow-up verification test on each repair, and appliances of 500 pounds or more move to inspections every three months until four consecutive quarters come in clean. Records are kept three years. The chronic leaker filing makes calendar year 2026 the first measurement year that matters: those leaks are reported appliance by appliance on March 1, 2027.
Why indirect ALD qualifies. The rule accepts direct and indirect systems alike. An indirect system must alert the operator when measurements indicate a loss of 50 pounds of refrigerant or 10% of the full charge, whichever is less — an alert threshold, not the applicability threshold, which stays at 1,500 pounds. It should monitor at least two operating parameters, be installed per manufacturer instructions, and be audited and calibrated annually, with three years of records covering installation, calibration, alert dates and leak locations. Because indirect ALD reads data existing controllers already produce, it covers a whole appliance, outdoor components included, without new sensors — which is also why whole-system ALD costs less than manual inspections.
The EPA's technical support document for the AIM Act lists Axiom Cloud as one of four manufacturers with commercially available indirect, whole-system, software-only leak-detection products in the United States, alongside Copeland, Matalex and Hussmann/Panasonic. That is a market observation in a rulemaking record, not an endorsement, approval or certification.
The compliance dividend of automating dispatch. Every automatically generated work order doubles as the leak-repair paper trail the rule asks for: a work-order number, a dated status, a resolve date, and the technician's repair notes. Compliance liability does not transfer to a software vendor. What automation supplies is audit-defensible evidence that the operator met its own obligations, on the dates the rule cares about — a capability Food City already has running. More on the rule: the AIM Act's requirements and when leak detection becomes a liability of its own.
What should grocery operators check before automating leak dispatch?
Any grocery operator already running early leak detection and a CMMS can automate the handoff. The integration is configured, not custom-engineered — the same pattern Axiom Cloud configures for each customer's system of record. The playbook: detect early, dispatch automatically, verify the fix.

The repeatable playbook: detect early, dispatch automatically, verify the fix.
Does the CMMS expose work-order creation, and who owns the dispatch rules? Trade, provider and priority have to map to real rules before automation is useful.
Which racks are in ALD scope, and when were they installed? Applicability is 1,500 pounds or more, and install date sets the deadline.
Does the control system already publish the data indirect ALD reads? At least two operating parameters, from controllers that already exist.
Who reads the loop closed? One-way status sync is a notification; two-way, plus review of technician notes, is verification.
Where do the records live, and for how long? Three years, including installation, annual audit and calibration, and every alert date.
Detect early and the leak is small. Dispatch automatically and no inbox is the bottleneck. Verify the fix and the record writes itself. Axiom Cloud's predictive maintenance module runs the same pattern on equipment faults.
Alerts don't fix leaks. Work orders do.
About K-VA-T Food Stores
K-VA-T Food Stores, Inc. is the company behind the Food City banner, headquartered in Abingdon, Virginia, with supermarkets across the southeastern United States. Refrigeration is mission-critical to protecting its perishable inventory. Axiom Cloud monitors more than 130 Food City stores, connected to ServiceChannel through the CMMS integration. Food City is a U.S. EPA GreenChill partner and earned the program's Exceptional Goal Achievement award in 2023 and 2024.
"Food City is one of GreenChill's newer partners, but is already leading the industry by surpassing its refrigerant emissions reduction goals."Bella Maranion · senior advisor in EPA's Stratospheric Protection Division and member of the GreenChill Team

The full two-page case study is available as a PDF: Alerts Don't Fix Leaks: How Food City Cut Refrigerant-Leak Resolution Time by 58%. Every Axiom Cloud case study is indexed on the case studies page.
Frequently Asked Questions
How does Axiom Cloud's ServiceChannel CMMS integration work?
When Axiom Cloud flags a predictive refrigeration anomaly, it generates a ServiceChannel work order automatically, pre-filled to the customer's dispatch rules, with the anomaly report, root cause, suggested actions and estimated financial impact attached. ServiceChannel syncs work-order status back to Axiom Cloud. Food City routes 100% of its predictive anomalies this way, with 0 manual steps in between.
How much faster did Food City resolve refrigerant leaks after the CMMS integration?
58% faster. Average refrigerant-leak time to resolution at Food City fell 58% after the mid-December 2025 go-live, and the gain held at a seven-month recompute. The same automated leak repair workflow runs across 130+ stores, and Axiom Cloud estimates $643K in modeled savings from Early Leak Detection over the past 12 months.
Does the AIM Act require automatic leak detection, and by when?
Yes, for larger systems. Commercial refrigeration and industrial process refrigeration appliances with a full charge of 1,500 pounds or more using a covered refrigerant must have an ALD system installed and in use. Appliances installed on or after January 1, 2026 need one within 30 days of installation; those installed on or after January 1, 2017 and before January 1, 2026 have until January 1, 2027.
What are the AIM Act chronic leaker reporting requirements?
Any refrigerant-containing appliance holding 15 pounds or more that leaks 125% or more of its full charge in a calendar year must be reported to the EPA by March 1 of the following year, appliance by appliance. Leaks across calendar year 2026 are therefore reported by March 1, 2027, which makes 2026 the first measurement year that matters.
What is the difference between direct and indirect automatic leak detection?
Direct ALD uses fixed hardware sensors to measure refrigerant concentration in air, detecting at 10 parts per million and alerting at 100, and works best in enclosed spaces. Indirect ALD is software that compares operating conditions such as temperature, pressure and liquid levels against historical trends, and covers the whole appliance including outdoor components. Both types are acceptable under the rule.
Did the integration require new hardware or a long IT project?
No. Every Food City deployment was software-only, and Axiom Cloud services were deployed to the full store portfolio within about two weeks. The ServiceChannel integration went live in mid-December 2025 and produced results within days, and the workflow runs across 130+ stores with no new hardware.
Does an automated work-order workflow help with AIM Act recordkeeping?
Yes. Every automatically generated work order doubles as the leak-repair paper trail: a work-order number, live status, resolve date, and technician repair notes reviewed to confirm each fix. Leak-repair and ALD records are kept three years. Compliance obligations stay with the operator; the workflow supplies the evidence.
Sources:
1. Automatic Leak Detection Requirements for Appliances Containing Hydrofluorocarbons and Certain Substitutes — U.S. Environmental Protection Agency, January 2026
2. Leak Repair Requirements for Appliances Containing Hydrofluorocarbons and Certain Substitutes — U.S. Environmental Protection Agency, January 2026
3. Phasedown of Hydrofluorocarbons: Management of Certain Hydrofluorocarbons and Substitutes Under the American Innovation and Manufacturing Act of 2020 — Federal Register, October 11, 2024
4. Subsection (h): Automatic Leak Detection Systems — technical support document, docket EPA-HQ-OAR-2022-0606-0167 — U.S. Environmental Protection Agency, September 2024
5. GreenChill Current Recipients — U.S. Environmental Protection Agency, 2024
6. Food City earns 2023 GreenChill achievement — Knox TN Today, September 27, 2024
7. Alerts Don't Fix Leaks: How Food City Cut Refrigerant-Leak Resolution Time by 58% — Axiom Cloud, August 2026
Image credits
Food City produce department, Cumberland, Kentucky — photo by virginiaretail, CC BY 2.0, via Wikimedia Commons; cropped.
Food City storefront, Cleveland, Tennessee — photo by Harrison Keely, CC BY 4.0, via Wikimedia Commons.



Comments